Syvecs Menu – Howellrace

General purpose ECUs

7 items

Part number	Product details	Retail price	Order from HRE
`SYV-S7GP`	S7 GP Full product description S7 GP is a motorsport-grade standalone engine management solution offering precise control, advanced logging, configurable safety strategies and CAN integration. Specification and key capabilities Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,950.00 ex VAT	Add to basket
`SYV-S7i`	S7i ECU Full product description An accessible standalone ECU with flexible analogue inputs, drive-by-wire support, CAN communications, Ethernet tuning and high-speed onboard data logging. Specification and key capabilities High-rate onboard logging supports calibration and fault diagnosis. Ethernet communications provide fast local or remote calibration access. CAN integration supports compatible displays and vehicle modules. Drive-by-wire pedal and throttle mapping can be configured. Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,200.00 ex VAT	Add to basket
`SYV-S7Plus`	S7Plus ECU Full product description A sealed standalone ECU with 22 analogue inputs, 16 fuel outputs, eight H-bridge outputs, six ignition outputs, dual lambda and knock inputs, three CAN buses and 32 MB logging. Specification and key capabilities High-rate onboard logging supports calibration and fault diagnosis. Ethernet communications provide fast local or remote calibration access. CAN integration supports compatible displays and vehicle modules. Drive-by-wire pedal and throttle mapping can be configured. Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,500.00 ex VAT	Add to basket
`SYV-S7D`	S7 Di ECU Full product description A direct-injection standalone ECU designed for modern high-pressure fuel systems, with flexible engine control, CAN integration, onboard logging and configurable protection strategies. Specification and key capabilities Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,700.00 ex VAT	Add to basket
`SYV-S8`	S8C ECU Full product description A high-capacity standalone ECU with 24 inputs, 28 outputs, dual lambda and knock channels, two EGT channels and two drive-by-wire drivers. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,125.00 ex VAT	Add to basket
`SYV-GDI4`	S-GDI ECU Full product description A compact direct-injection ECU for four-cylinder applications, combining high-pressure fuel control with advanced calibration, logging and safety functions. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,400.00 ex VAT	Add to basket
`SYV-S12`	S12C ECU Full product description The flagship high-channel-count ECU, providing 28 inputs, 50 outputs, three drive-by-wire drivers, four knock inputs, four lambda inputs and two EGT channels. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. Standalone engine-management control for professional road, track and competition installations. Flexible sensor, actuator and CAN integration with high-speed calibration and data logging. Final I/O, driver and communications requirements must be checked against the chosen ECU. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£5,150.00 ex VAT	Add to basket

S7Plus plug-and-play kits

41 items

Part number	Product details	Retail price	Order from HRE
`S7Plus-RS3Mk2`	Audi TTRS / RS3 Mk2 PnP kit Full product description Audi TTRS / RS3 Mk2 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,325.00 ex VAT	Add to basket
`S7Plus-BE46`	BMW M3 E46 PnP kit Full product description BMW M3 E46 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,225.00 ex VAT	Add to basket
`S7Plus-BE92`	BMW M3 E92 PnP kit Full product description A plug-in standalone ECU package for BMW E92 M3 manual and DCT models, adding live calibration, VVT, dual-lambda control, flex fuel, traction strategies, configurable safety trips and DCT torque integration. Specification and key capabilities Plug-in installation using the original BMW ECU location and vehicle wiring architecture. Live calibration of fuel, ignition, throttle and VANOS control strategies. Dual-lambda control, configurable flex-fuel, traction and launch strategies. Configurable oil-pressure, fuel-pressure, temperature, lambda and engine-safety trips. DCT torque reporting and gearbox integration for correctly specified DCT vehicles. High-speed onboard logging for calibration, fault diagnosis and engine protection. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,125.00 ex VAT	Add to basket
`S7Plus-N54`	BMW N54 PnP kit Full product description BMW N54 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,300.00 ex VAT	Add to basket
`S7Plus-Canam`	Can-Am MY17-20 PnP kit Full product description Can-Am MY17-20 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,900.00 ex VAT	Add to basket
`S7Plus-CanAmDF21`	Can-Am MY21-23 direct-fit ECU Full product description Can-Am MY21-23 direct-fit ECU is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,100.00 ex VAT	Add to basket
`S7Plus-C6`	Corvette C6 PnP kit Full product description Corvette C6 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-RS/ST`	Ford Focus RS/ST Mk2 PnP kit Full product description Ford Focus RS/ST Mk2 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,150.00 ex VAT	Add to basket
`S7Plus-LT4-LT1`	GM LT1/LT4 PnP kit (NTK x2) Full product description GM LT1/LT4 PnP kit (NTK x2) is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,300.00 ex VAT	Add to basket
`S7Plus-HCVC`	Honda Civic EP3/DC5 01-05 PnP kit Full product description Honda Civic EP3/DC5 01-05 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-HCVC1`	Honda Civic FD2 2006-2011 PnP kit Full product description Honda Civic FD2 2006-2011 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-HCVCFK2`	Honda Civic FK2 2015-2017 PnP kit Full product description Honda Civic FK2 2015-2017 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,150.00 ex VAT	Add to basket
`S7Plus-HCVCFK8`	Honda Civic FK8 2017+ PnP kit Full product description Honda Civic FK8 2017+ PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,150.00 ex VAT	Add to basket
`S7Plus-NGTR`	Nissan R35 GT-R PnP kit Full product description Nissan R35 GT-R PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,425.00 ex VAT	Add to basket
`S7Plus-NGTR20`	Nissan R35 GT-R 2020+ PnP kit Full product description Nissan R35 GT-R 2020+ PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,900.00 ex VAT	Add to basket
`S7Plus-N350zDE`	Nissan 350Z DE PnP kit Full product description Nissan 350Z DE PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-N350zHR`	Nissan 350Z HR PnP kit Full product description Nissan 350Z HR PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-N370Z`	Nissan 370Z PnP kit Full product description Nissan 370Z PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-NGTR2`	Nissan Skyline GT-R R32/33/34 PnP kit Full product description Nissan Skyline GT-R R32/33/34 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,100.00 ex VAT	Add to basket
`S7Plus-M838T`	McLaren 12C/570/600LT/675 Full product description McLaren 12C/570/600LT/675 is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,000.00 ex VAT	Add to basket
`S7Plus-M156`	Mercedes M156/M159 PnP kit Full product description Mercedes M156/M159 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,200.00 ex VAT	Add to basket
`S7Plus-EVO47`	Mitsubishi Evo 4-8 (260) PnP kit Full product description Mitsubishi Evo 4-8 (260) PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-EVO89`	Mitsubishi Evo 8/9 PnP kit Full product description Mitsubishi Evo 8/9 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-EVOX`	Mitsubishi Evo X manual/SST PnP kit Full product description Mitsubishi Evo X manual/SST PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-PolarisProRDF`	Polaris RZR Pro R direct-fit kit Full product description Polaris RZR Pro R direct-fit kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-996DF`	Porsche 996 direct fit Full product description Porsche 996 direct fit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,300.00 ex VAT	Add to basket
`S7Plus-997DF`	Porsche 997 direct fit Full product description Porsche 997 direct fit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,300.00 ex VAT	Add to basket
`S7Plus-P991.1`	Porsche 991.1 PnP kit Full product description Porsche 991.1 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,500.00 ex VAT	Add to basket
`S7Plus-P991.2`	Porsche 991.2 PnP kit Full product description Porsche 991.2 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,500.00 ex VAT	Add to basket
`S7Plus-P991.1LL`	Porsche 991.1 long-loom PnP kit Full product description Porsche 991.1 long-loom PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£5,600.00 ex VAT	Add to basket
`S7Plus-P991.2LL`	Porsche 991.2 long-loom PnP kit Full product description Porsche 991.2 long-loom PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£5,600.00 ex VAT	Add to basket
`S7Plus-P997.2`	Porsche 911 997.2 PnP kit Full product description Porsche 911 997.2 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,500.00 ex VAT	Add to basket
`S7Plus-PCayman`	Porsche Cayman 981 PnP kit Full product description Porsche Cayman 981 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,500.00 ex VAT	Add to basket
`S7Plus-Sub9205`	Subaru 1992-2005 PnP kit Full product description Subaru 1992-2005 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,150.00 ex VAT	Add to basket
`S7Plus-Sub0614`	Subaru 2006-2014 PnP kit Full product description Subaru 2006-2014 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,150.00 ex VAT	Add to basket
`S7Plus-Sub15`	Subaru 2015+ PnP kit Full product description Subaru 2015+ PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,150.00 ex VAT	Add to basket
`S7Plus-GT86BRZ`	Toyota GT86 / Subaru BRZ manual PnP kit Full product description Toyota GT86 / Subaru BRZ manual PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,150.00 ex VAT	Add to basket
`S7Plus-TSupra`	Toyota Supra Mk4 PnP kit Full product description Toyota Supra Mk4 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,300.00 ex VAT	Add to basket
`S7Plus-TSupraV`	Toyota Supra Mk4 VVTi PnP kit Full product description Toyota Supra Mk4 VVTi PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-VWR32`	VW Golf R32 Mk4/5 PnP kit Full product description VW Golf R32 Mk4/5 PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,200.00 ex VAT	Add to basket
`S7Plus-YamXYZ`	Yamaha YXZ1000R PnP kit Full product description Yamaha YXZ1000R PnP kit is a vehicle-specific standalone ECU kit designed for straightforward connection to the original loom, with advanced calibration, logging, engine protection and motorsport strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,900.00 ex VAT	Add to basket

S7D plug-and-play kits

9 items

Part number	Product details	Retail price	Order from HRE
`S7D-RS8V1DF`	Audi TTRS / RS3 8V1 direct-fit kit Full product description Audi TTRS / RS3 8V1 direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,325.00 ex VAT	Add to basket
`S7D-RS8V2DF`	Audi TTRS / RS3 8V2 direct-fit kit Full product description Audi TTRS / RS3 8V2 direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,325.00 ex VAT	Add to basket
`S7D-RS3DWNADF`	Audi TTRS / RS3 DWNA direct-fit kit Full product description Audi TTRS / RS3 DWNA direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,325.00 ex VAT	Add to basket
`S7D-RS8Y1DF`	Audi TTRS / RS3 8Y1 direct-fit kit Full product description Audi TTRS / RS3 8Y1 direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,550.00 ex VAT	Add to basket
`S7D-RS8Y2DF`	Audi TTRS / RS3 8Y2 direct-fit kit Full product description Audi TTRS / RS3 8Y2 direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,550.00 ex VAT	Add to basket
`S7D-Y62`	Nissan Patrol Y62 PnP kit Full product description Nissan Patrol Y62 PnP kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,300.00 ex VAT	Add to basket
`S7D-VW7RDF`	VW Golf 7R direct-fit kit Full product description VW Golf 7R direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,325.00 ex VAT	Add to basket
`S7D-VW7.5RDF`	VW Golf 7.5R direct-fit kit Full product description VW Golf 7.5R direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,325.00 ex VAT	Add to basket
`S7D-VW8RDF`	VW Golf 8R direct-fit kit Full product description VW Golf 8R direct-fit kit combines direct-injection engine control with vehicle-specific plug-and-play integration, advanced logging, safety strategies and motorsport calibration features. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,550.00 ex VAT	Add to basket

S7i plug-and-play kits

6 items

Part number	Product details	Retail price	Order from HRE
`S7i-MEVO89`	Mitsubishi Evo 8/9 MR/GSR three-plug PnP kit Full product description Mitsubishi Evo 8/9 MR/GSR three-plug PnP kit provides integrated standalone engine management for the listed vehicle while retaining key original systems and adding configurable control and data logging. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,800.00 ex VAT	Add to basket
`S7i-NGTR2`	Nissan Skyline GT-R R32/33/34 PnP kit Full product description Nissan Skyline GT-R R32/33/34 PnP kit provides integrated standalone engine management for the listed vehicle while retaining key original systems and adding configurable control and data logging. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,800.00 ex VAT	Add to basket
`S7i-SUB06`	Subaru Impreza 2006 Hawk PnP kit Full product description Subaru Impreza 2006 Hawk PnP kit provides integrated standalone engine management for the listed vehicle while retaining key original systems and adding configurable control and data logging. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,800.00 ex VAT	Add to basket
`S7i-TSupra`	Toyota Supra Mk4 manual PnP kit Full product description Toyota Supra Mk4 manual PnP kit provides integrated standalone engine management for the listed vehicle while retaining key original systems and adding configurable control and data logging. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,875.00 ex VAT	Add to basket
`S7i-TSupraV`	Toyota Supra Mk4 VVTi manual PnP kit Full product description Toyota Supra Mk4 VVTi manual PnP kit provides integrated standalone engine management for the listed vehicle while retaining key original systems and adding configurable control and data logging. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,800.00 ex VAT	Add to basket
`S7i-JimnyDF`	Suzuki Jimny JB74 direct-fit ECU kit Full product description Suzuki Jimny JB74 direct-fit ECU kit provides integrated standalone engine management for the listed vehicle while retaining key original systems and adding configurable control and data logging. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,100.00 ex VAT	Add to basket

S7 PnP boards

8 items

Part number	Product details	Retail price	Order from HRE
`S7-KawaSXR`	Kawasaki SXR plug-in kit Full product description Kawasaki SXR plug-in kit provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,000.00 ex VAT	Add to basket
`S7-E4VO7`	Mitsubishi Evo 4-7 and 8 260 Full product description Mitsubishi Evo 4-7 and 8 260 provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,950.00 ex VAT	Add to basket
`S7-SUB92`	Subaru 1992-1996 Full product description Subaru 1992-1996 provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,950.00 ex VAT	Add to basket
`S7-SUB97`	Subaru 1997-1998 Full product description Subaru 1997-1998 provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,950.00 ex VAT	Add to basket
`S7-SUB99`	Subaru 1999-2000 Full product description Subaru 1999-2000 provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,950.00 ex VAT	Add to basket
`S7-SUB01`	Subaru 2001-2005 Full product description Subaru 2001-2005 provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Per-cylinder knock monitoring and protection strategies can be configured. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,950.00 ex VAT	Add to basket
`S7GP-NGTR2`	Nissan Skyline GT-R R32/33/34 PnP kit Full product description Nissan Skyline GT-R R32/33/34 PnP kit provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,500.00 ex VAT	Add to basket
`S7GP-TSUPRA`	Toyota Supra Mk4 manual PnP kit Full product description Toyota Supra Mk4 manual PnP kit provides a plug-in route to Syvecs engine management using the vehicle's existing ECU location and wiring architecture. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,600.00 ex VAT	Add to basket

GDI4 plug-and-play kits

8 items

Part number	Product details	Retail price	Order from HRE
`SGDI-MK7ST`	Ford Fiesta ST Mk7 Full product description Ford Fiesta ST Mk7 provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,800.00 ex VAT	Add to basket
`SGDI-FFST`	Ford Focus ST Mk3 PnP kit Full product description Ford Focus ST Mk3 PnP kit provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,800.00 ex VAT	Add to basket
`SGDI-RSMk3`	Ford Focus RS Mk3 PnP kit Full product description Ford Focus RS Mk3 PnP kit provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. High-rate onboard logging supports calibration and fault diagnosis. Protection trips can be configured for pressure, temperature and other critical channels. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,800.00 ex VAT	Add to basket
`SGDI-TSI-DF`	VW TSI PnP kit Full product description VW TSI PnP kit provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,600.00 ex VAT	Add to basket
`SGDI-TFSI-DF`	VW TFSI PnP kit Full product description VW TFSI PnP kit provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,600.00 ex VAT	Add to basket
`SGDI-Yaris`	Toyota GR Yaris PnP ECU Full product description Toyota GR Yaris PnP ECU provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,300.00 ex VAT	Add to basket
`SGDI-Yaris24`	Toyota GR Yaris 2024+ manual PnP ECU Full product description Toyota GR Yaris 2024+ manual PnP ECU provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,300.00 ex VAT	Add to basket
`SGDI-Corolla`	Toyota GR Corolla PnP ECU Full product description Toyota GR Corolla PnP ECU provides direct-injection engine control, OEM-system integration and advanced calibration, logging and protection strategies. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,300.00 ex VAT	Add to basket

S12 plug-and-play kits

6 items

Part number	Product details	Retail price	Order from HRE
`S12-R8V8`	Audi R8 V8 PnP kit including MAP sensor Full product description Audi R8 V8 PnP kit including MAP sensor uses the flagship S12 platform for high-channel-count engine control and full vehicle integration. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£7,700.00 ex VAT	Add to basket
`S12-R8V10`	Audi R8 V10 PnP kit including MAP sensor Full product description Audi R8 V10 PnP kit including MAP sensor uses the flagship S12 platform for high-channel-count engine control and full vehicle integration. Specification and key capabilities Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£8,200.00 ex VAT	Add to basket
`S12-R8V1017`	Audi R8 V10 2017+ PnP kit including MAP sensor Full product description Audi R8 V10 2017+ PnP kit including MAP sensor uses the flagship S12 platform for high-channel-count engine control and full vehicle integration. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£9,200.00 ex VAT	Add to basket
`S12-LAM520`	Lamborghini Gallardo 520 PnP kit Full product description Lamborghini Gallardo 520 PnP kit uses the flagship S12 platform for high-channel-count engine control and full vehicle integration. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£6,600.00 ex VAT	Add to basket
`S12-LAM560`	Lamborghini Gallardo 560 PnP kit including MAP sensor Full product description Lamborghini Gallardo 560 PnP kit including MAP sensor uses the flagship S12 platform for high-channel-count engine control and full vehicle integration. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£8,200.00 ex VAT	Add to basket
`S12-LAMHUR`	Lamborghini Huracán PnP kit including MAP sensor Full product description Lamborghini Huracán PnP kit including MAP sensor uses the flagship S12 platform for high-channel-count engine control and full vehicle integration. Specification and key capabilities Supports live adjustment of the engine calibration and relevant torque data. Launch-control behaviour and torque ramp-in can be calibrated. Anti-lag and rolling-limit strategies are available where the installation supports them. Variable cam-timing control is managed by the ECU. Closed-loop lambda control is supported with the specified sensors. Flex-fuel strategies can be configured for compatible fuel systems. Cruise-control integration can be retained or added on compatible vehicles. High-rate onboard logging supports calibration and fault diagnosis. Vehicle-specific route to Syvecs engine management using the original ECU location and wiring architecture where applicable. Provides advanced calibration, high-speed data logging and configurable engine-protection strategies. Vehicle year, engine, transmission and existing modifications must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£9,200.00 ex VAT	Add to basket

4WD / AWD controllers

12 items

Part number	Product details	Retail price	Order from HRE
`SYV-4WDGTR`	Nissan R35 GT-R standalone 4WD controller V3 Full product description Nissan R35 GT-R standalone 4WD controller V3 provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£750.00 ex VAT	Add to basket
`SYV-4WDHUR`	Huracán 4WD controller Full product description Huracán 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,050.00 ex VAT	Add to basket
`SYV-4WD991`	Porsche 991.1/.2 4WD controller Full product description Porsche 991.1/.2 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,050.00 ex VAT	Add to basket
`SYV-4WD997`	Porsche 997.1/.2 4WD controller Full product description Porsche 997.1/.2 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£800.00 ex VAT	Add to basket
`SYV-4WDCorolla`	Toyota GR Corolla 4WD controller Full product description Toyota GR Corolla 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£800.00 ex VAT	Add to basket
`SYV-4WDYaris24`	Toyota GR Yaris 2024+ 4WD controller Full product description Toyota GR Yaris 2024+ 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£800.00 ex VAT	Add to basket
`SYV-4WDYaris`	Toyota GR Yaris 4WD controller Full product description Toyota GR Yaris 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£800.00 ex VAT	Add to basket
`SYV-4WDQ60`	Infiniti Q60 4WD controller Full product description Infiniti Q60 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	POA ex VAT
`SYV-4WD-HALP-RS3`	Audi RS3/TTRS 4WD controller Full product description Audi RS3/TTRS 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	POA ex VAT
`SYV-4WD-HALP-VAG`	VAG Golf/S3 4WD controller Full product description VAG Golf/S3 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,050.00 ex VAT	Add to basket
`SYV-4WD-GEN`	Generic 4WD controller Full product description Generic 4WD controller provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Launch-control behaviour and torque ramp-in can be calibrated. CAN integration supports compatible displays and vehicle modules. Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£900.00 ex VAT	Add to basket
`SYV-4WDS&P`	4WD controller switch and potentiometer Full product description 4WD controller switch and potentiometer provides configurable four-wheel-drive torque distribution and centre-differential control using vehicle data over CAN. Specification and key capabilities Configurable control of compatible four-wheel-drive solenoids, pumps or motors. Uses vehicle and ECU data to develop repeatable torque-distribution strategies. Installation, CAN data and actuator compatibility must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£150.00 ex VAT	Add to basket

Expanders

4 items

Part number	Product details	Retail price	Order from HRE
`SYV-X4`	X4 expander including connector kit Full product description A compact CAN-connected module for adding extra inputs and outputs where space is limited. Specification and key capabilities CAN integration supports compatible displays and vehicle modules. Drive-by-wire pedal and throttle mapping can be configured. Adds configurable inputs, outputs or communications to a compatible control system. Designed for professional CAN-connected vehicle and motorsport installations. Channel count and ECU compatibility must be confirmed for the intended application. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£450.00 ex VAT	Add to basket
`SYV-X10`	X10 expander including connector kit Full product description A compact second-generation CAN expander that adds flexible sensor inputs and programmable outputs to compatible engine and vehicle-control systems. Specification and key capabilities Drive-by-wire pedal and throttle mapping can be configured. Adds configurable inputs, outputs or communications to a compatible control system. Designed for professional CAN-connected vehicle and motorsport installations. Channel count and ECU compatibility must be confirmed for the intended application. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£700.00 ex VAT	Add to basket
`SYV-X20L`	X20 Lite expander including connector kit Full product description A sealed CAN expansion module with 20 inputs, eight H-bridge outputs, 12 low-side outputs, four analogue outputs and two direct NTK lambda interfaces. Specification and key capabilities Drive-by-wire pedal and throttle mapping can be configured. Adds configurable inputs, outputs or communications to a compatible control system. Designed for professional CAN-connected vehicle and motorsport installations. Channel count and ECU compatibility must be confirmed for the intended application. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£825.00 ex VAT	Add to basket
`SYV-OEX`	OEX expander Full product description An OEM-ECU expander that adds motorsport strategies, extra I/O and CAN/CAN-FD integration without replacing the original engine controller. Specification and key capabilities Flex-fuel strategies can be configured for compatible fuel systems. Per-cylinder knock monitoring and protection strategies can be configured. Closed-loop boost control supports configurable targets and environmental trims. Traction strategies can use wheel speed and relevant vehicle-motion inputs. Injector calibration and staged-fuel strategies can be configured where supported. Wet or dry nitrous control can be integrated with appropriate safety logic. CAN integration supports compatible displays and vehicle modules. Drive-by-wire pedal and throttle mapping can be configured. Adds configurable inputs, outputs or communications to a compatible control system. Designed for professional CAN-connected vehicle and motorsport installations. Channel count and ECU compatibility must be confirmed for the intended application. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£900.00 ex VAT	Add to basket

GDI drivers

1 items

Photo	Part number	Product details	Retail price	Order from HRE
	`SYV-GDI12`	GDI driver, 12 channels, including connector kit Full product description GDI driver, 12 channels, including connector kit adds high-speed direct-injection driver channels for compatible engine-management installations. Specification and key capabilities Adds the high-speed driver channels required by compatible direct-injection systems. Designed to integrate with suitable Syvecs engine-management hardware. Injector type, channel count and wiring requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£950.00 ex VAT	Add to basket

ECU options

7 items

Part number	Product details	Retail price	Order from HRE
`SYV-EVOXCON`	Evo X connector surcharge Full product description Evo X connector surcharge is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£200.00 ex VAT	Add to basket
`SYV-S7IPLUSUP`	S7i upgrade to S7Plus Full product description S7i upgrade to S7Plus is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£700.00 ex VAT	Add to basket
`SYV-GDIC`	GDI option for S8/S12 Full product description GDI option for S8/S12 is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£420.00 ex VAT	Add to basket
`SYV-GDIS7`	GDI option for S7Plus Full product description GDI option for S7Plus is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£275.00 ex VAT	Add to basket
`SYV-GEAR`	Gearbox-control option for S7/S8/S12 ECU Full product description Gearbox-control option for S7/S8/S12 ECU is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£375.00 ex VAT	Add to basket
`SYV-MEM128`	128 MB memory upgrade for S7 Full product description 128 MB memory upgrade for S7 is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£300.00 ex VAT	Add to basket
`SYV-FEAT-EWG`	Electronic wastegate control Full product description Electronic wastegate control is a factory option or upgrade that extends the capability of a compatible Syvecs ECU. Specification and key capabilities Factory option or upgrade for compatible Syvecs engine-management hardware. Extends the control, memory, connection or gearbox-integration capability of the ECU. The ECU model and build specification must be confirmed before ordering. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£325.00 ex VAT	Add to basket

Connector kits

5 items

Part number	Product details	Retail price	Order from HRE
`SYV-CON7I`	Pin/connector kit for S7i Full product description Pin/connector kit for S7i contains the matching connectors and terminals required to build a professional ECU wiring installation. Specification and key capabilities Matching connector and terminal hardware for a professional wiring installation. Suitable crimp tooling, strain relief and motorsport wiring practice are required. Connector family and ECU compatibility must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£100.00 ex VAT	Add to basket
`SYV-CON7Plus`	Pin/connector kit for S7Plus Full product description Pin/connector kit for S7Plus contains the matching connectors and terminals required to build a professional ECU wiring installation. Specification and key capabilities Matching connector and terminal hardware for a professional wiring installation. Suitable crimp tooling, strain relief and motorsport wiring practice are required. Connector family and ECU compatibility must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£100.00 ex VAT	Add to basket
`SYV-CON8`	Pin/connector kit for S8 Full product description Pin/connector kit for S8 contains the matching connectors and terminals required to build a professional ECU wiring installation. Specification and key capabilities Matching connector and terminal hardware for a professional wiring installation. Suitable crimp tooling, strain relief and motorsport wiring practice are required. Connector family and ECU compatibility must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£165.00 ex VAT	Add to basket
`SYV-CON12`	Pin/connector kit for S12 Full product description Pin/connector kit for S12 contains the matching connectors and terminals required to build a professional ECU wiring installation. Specification and key capabilities Matching connector and terminal hardware for a professional wiring installation. Suitable crimp tooling, strain relief and motorsport wiring practice are required. Connector family and ECU compatibility must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£100.00 ex VAT	Add to basket
`SYV-CON7D`	Pin/connector kit for S7D Full product description Pin/connector kit for S7D contains the matching connectors and terminals required to build a professional ECU wiring installation. Specification and key capabilities Matching connector and terminal hardware for a professional wiring installation. Suitable crimp tooling, strain relief and motorsport wiring practice are required. Connector family and ECU compatibility must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£120.00 ex VAT	Add to basket

Sensors

14 items

Part number	Product details	Retail price	Order from HRE
`SYV-MAP4`	4-bar MAP sensor including connector kit Full product description 4-bar MAP sensor including connector kit provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£120.00 ex VAT	Add to basket
`SYV-ACT`	Fast-response air-temperature sensor Full product description Fast-response air-temperature sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£70.00 ex VAT	Add to basket
`SYV-FLEX`	Flex-fuel sensor Full product description Flex-fuel sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Flex-fuel strategies can be configured for compatible fuel systems. Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£200.00 ex VAT	Add to basket
`SYV-FP`	Fuel-pressure sensor, 10 bar Full product description Fuel-pressure sensor, 10 bar provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£140.00 ex VAT	Add to basket
`SYV-KS`	Bosch full-range knock sensor Full product description Bosch full-range knock sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£65.00 ex VAT	Add to basket
`SYV-LSU49`	Bosch LSU 4.9 sensor Full product description Bosch LSU 4.9 sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£135.00 ex VAT	Add to basket
`SYV-LSUPNP`	Bosch LSU 4.9 with 2.5 m PnP cable Full product description Bosch LSU 4.9 with 2.5 m PnP cable provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£170.00 ex VAT	Add to basket
`SYV-NTK`	NTK LZA-09-E1 wideband lambda sensor Full product description NTK LZA-09-E1 wideband lambda sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£155.00 ex VAT	Add to basket
`SYV-NTKC`	2.5 m Syvecs PnP lambda cable Full product description 2.5 m Syvecs PnP lambda cable provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£60.00 ex VAT	Add to basket
`SYV-NTKCON`	NTK connector kit Full product description NTK connector kit provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£20.00 ex VAT	Add to basket
`SYV-NTKPNP`	NTK LZA-09-E1 with 2.5 m PnP cable Full product description NTK LZA-09-E1 with 2.5 m PnP cable provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£200.00 ex VAT	Add to basket
`SYV-OP`	Oil-pressure sensor, 10 bar Full product description Oil-pressure sensor, 10 bar provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£145.00 ex VAT	Add to basket
`SYV-OT`	Oil-temperature sensor Full product description Oil-temperature sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£55.00 ex VAT	Add to basket
`SYV-EGT`	K-type EGT sensor Full product description K-type EGT sensor provides motorsport-grade measurement for use with compatible ECUs, displays and data-logging systems. Specification and key capabilities Sensor hardware intended for compatible engine-management, display or logging systems. Correct calibration, wiring, range and thread or mounting specification are essential. Howell Race Engineering will confirm suitability for the intended installation. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£70.00 ex VAT	Add to basket

Accessories

13 items

Part number	Product details	Retail price	Order from HRE
`SYV-BTIMU`	Bluetooth module and 2025 app Full product description A Bluetooth and CAN interface with inertial measurement, designed to connect a compatible mobile app to live vehicle data. Specification and key capabilities High-rate onboard logging supports calibration and fault diagnosis. CAN integration supports compatible displays and vehicle modules. Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£380.00 ex VAT	Add to basket
`SYV-OBDCABLE`	OBD cable for BTIMU and GPSBT Full product description OBD cable for BTIMU and GPSBT extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£40.00 ex VAT	Add to basket
`SYV-CAL`	Calibration switch Full product description Calibration switch extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£65.00 ex VAT	Add to basket
`SYV-CANV2BC`	CAN Bridge V2 including billet case Full product description CAN Bridge V2 including billet case extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£350.00 ex VAT	Add to basket
`SYV-GPSBT`	100 Hz 6-axis GPS, Bluetooth and 2025 app Full product description A 100 Hz GPS and six-axis motion module with Bluetooth connectivity for high-rate speed, position and vehicle-dynamics data. Specification and key capabilities High-rate onboard logging supports calibration and fault diagnosis. CAN integration supports compatible displays and vehicle modules. Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£800.00 ex VAT	Add to basket
`SYV-GPS`	100 Hz 6-axis GPS and Bluetooth, no app Full product description 100 Hz 6-axis GPS and Bluetooth, no app extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£750.00 ex VAT	Add to basket
`SYV-SOL3`	Pierburg three-port solenoid Full product description Pierburg three-port solenoid extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£40.00 ex VAT	Add to basket
`SYV-WIFI`	Wi-Fi dongle Full product description Wi-Fi dongle extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£100.00 ex VAT	Add to basket
`SYV-WMI`	Water-methanol controller Full product description A configurable water/methanol injection controller with ECU integration, safety monitoring and strategy control over CAN. Specification and key capabilities CAN integration supports compatible displays and vehicle modules. Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£450.00 ex VAT	Add to basket
`SYV-LAM2CAN`	Eight-channel Lambda Expander Full product description An eight-channel NTK lambda interface with onboard fault monitoring, dual exhaust-pressure inputs and fast CAN transmission to ECUs and logging systems. Specification and key capabilities CAN integration supports compatible displays and vehicle modules. Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£775.00 ex VAT	Add to basket
`SYV-KT8V3`	K-type eight-channel EGT expander V3 Full product description An eight-channel K-type exhaust-gas-temperature module that transmits fast temperature data over CAN. Specification and key capabilities High-rate onboard logging supports calibration and fault diagnosis. CAN integration supports compatible displays and vehicle modules. Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£425.00 ex VAT	Add to basket
`SYV-MCH`	Mini Comms Hub Full product description Mini Comms Hub extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,436.00 ex VAT	Add to basket
`SYV-MCHL`	Mini Comms Hub Lite Full product description Mini Comms Hub Lite extends communication, logging, control or installation capability within a Syvecs-equipped vehicle. Specification and key capabilities Accessory hardware for communication, logging, control or installation within a Syvecs-equipped vehicle. Designed to complement compatible Syvecs ECUs and vehicle-control modules. Connection and software requirements must be confirmed before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,230.00 ex VAT	Add to basket

Power distribution

7 items

Part number	Product details	Retail price	Order from HRE
`SYV-PDUX2B`	PDUX2B Full product description A programmable solid-state power distribution unit that replaces conventional relays and fuses with protected, configurable outputs and CAN-based control. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. CAN integration supports compatible displays and vehicle modules. Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£1,600.00 ex VAT	Add to basket
`SYV-PDUX3B`	PDUX3B Full product description A motorsport power distribution unit with 34 programmable outputs, 16 inputs, up to 350 A total capacity, Ethernet, three CAN buses, RS232 and LIN communications. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. CAN integration supports compatible displays and vehicle modules. Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£2,630.00 ex VAT	Add to basket
`SYV-PDUX4B`	PDUX4B Full product description A high-output programmable power distribution unit for demanding professional motorsport electrical systems. Specification and key capabilities Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£3,449.00 ex VAT	Add to basket
`SYV-PDUX3B-AS`	PDUX3B-AS Full product description PDUX3B-AS provides programmable solid-state power distribution for professional motorsport and performance vehicle wiring. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. CAN integration supports compatible displays and vehicle modules. Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£4,100.00 ex VAT	Add to basket
`SYV-PDUX4B-AS`	PDUX4B-AS Full product description PDUX4B-AS provides programmable solid-state power distribution for professional motorsport and performance vehicle wiring. Specification and key capabilities Ethernet communications provide fast local or remote calibration access. CAN integration supports compatible displays and vehicle modules. Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£5,144.00 ex VAT	Add to basket
`SYV-PDUXCON`	PDUX connector kit Full product description PDUX connector kit provides programmable solid-state power distribution for professional motorsport and performance vehicle wiring. Specification and key capabilities Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£180.00 ex VAT	Add to basket
`SYV-PDUKP`	PDU keypad Full product description PDU keypad provides programmable solid-state power distribution for professional motorsport and performance vehicle wiring. Specification and key capabilities Programmable solid-state power distribution for professional vehicle electrical systems. Replaces conventional relay and fuse functions with configurable, monitored outputs. Total current, channel loading, wiring and communications must be specified before supply. View complete product page Howell Race Engineering will confirm compatibility and the exact specification before supply.	£450.00 ex VAT	Add to basket

Displays

1 items

Photo	Part number	Product details	Retail price	Order from HRE
	`SYV-TDV2`	Syvecs Tiny Dash 2.4 V2 Full product description A compact waterproof 2.4-inch touchscreen display with configurable layouts, CAN integration and additional analogue and PWM channels. Specification and key capabilities Closed-loop boost control supports configurable targets and environmental trims. CAN integration supports compatible displays and vehicle modules. Configurable driver display for live ECU and vehicle data. Designed for CAN-connected road, track and motorsport installations. Display layout, communications and sensor requirements must be confirmed before supply. View complete product page Syvecs technical page and downloads Howell Race Engineering will confirm compatibility and the exact specification before supply.	£360.00 ex VAT	Add to basket

Syvecsmenu.

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Specification and key capabilities

Full product description

Syvecs
menu.